BULLET 3000-6000AIR Cowboy or Spider

Rapidfire

The RF BULLET 3000 AIR Evolution plasma table is the latest 2022 model. It was built from the best components available on the market. It is highly efficient, loading capacity up to 120mm thick sheets. Possibility of gas cutting up to 120mm – replaceable plasma torch. All this in a compact, specially reinforced construction.

Additional equipment: Created for demanding entrepreneurs, for whom the most important is:

Industrial use of the machine.

Easy operation.

Reliable technical support.

Strong construction with a lifetime warranty.

Stable software developed exclusively for plasma cutting for 18 years.

Possibility of expanding the entire system in the future.

The working area of ​​the table most often chosen is 1500x3000mm. Other dimensions available on request. The drive systems we use are precise backlash-free planetary gears with SERVO MOTORS. The use of such a drive allows for excellent repeatability of production. It also reduces the frequency of services related to adjustment and calibration. The Y-axis drives have been installed on both sides, and the motors position themselves independently of the set parameters, which eliminates the diagonal chamfer of the portal. They work even more precisely to obtain the maximum quality of the cut detail during plasma or gas cutting.

Laser pointer – allows you to quickly locate the burning point on the sheet metal and is fully integrated with the software.

Triple homing system – This is a unique advantage of the software that combines all available torch calibration technologies in one machine.

Sectional mechanical fume extraction system – Will reduce costs when purchasing appropriate filter ventilation.

Mechanical anti-collision torch holder – excellent protection of the Z axis and portal components against damage.

Plasma torch with automatic electro-mechanical height control – precise positioning over the cut material has been perfected. A crooked cut surface is no longer a problem. Proper torch height is an extremely important part of proper high-performance cutting. Our solution will significantly reduce the consumption of consumables and increase the ability to pierce the thickest materials.

Modular construction of the grate with hooks for fast waste cleaning.

In accordance with our idea of ​​”high quality”, we took care of your production even more than others. When programming the latest version of the software, we also took into account the possibility of failure and the speed of its removal.

How do we do it?

Remote factory reset – your machine connected to the network will allow for remote diagnosis at a surprisingly fast pace. We will diagnose the problem and tell you how to solve it. And if it turns out that the operator made a mistake, we can remotely restore the system to factory settings without losing all data (e.g. regarding cutting, a given detail, the current work). They are stored in a safe place on the controllers. The use of the anti-collision torch holder consists in the immediate transfer of information to the interface – something went wrong and the machine must be turned off to check it. Restoring the place of the completed work after a failure – data and coordinates are stored on the machine’s controllers.

OPTIONAL:

Modular construction – the table can be extended with further modules up to the maximum dimensions of the working area of 1600mm x 6150m.

Portal extension – the possibility of installing / replacing with a longer portal in order to operate the burner outside the working surface of the table. This solution is used for cutting pipes and profiles next to the table.

Plasma and gas burning – depending on the customer’s needs, we are able to modify the table to burn with gas. All components and software are adapted to this. The torch holder allows you to quickly replace the plasma torch with a gas torch and vice versa, depending on the needs.

Remote control attachment – the operator will be able to control the work of the table from the remote control. Possibility of using a water grate – filter ventilation will not be needed. Remote diagnosis will speed up the work of the service – PRO-Net technology allows for quick diagnosis via Wi-Fi (necessary access to the network at the place of operation of the device).

Safe electronics – Service of the table is very simple thanks to the replaceable, isolated electronics panel located in the control panel.

MOBILE control panel – For the most demanding. Reinforced, resistant to mechanical damage, made very carefully with attention to detail, such as a pull-out keyboard cabinet or lockable wheels. It includes an Intel Pentium processor with SSD and Wi-Fi. All drawings read on a large screen, and the double-layer glued glass protecting the screen is a more effective solution than tempered glass.

CONTROL
RapidFire Enigma by CutComp system (driver/controller+software).
The program is very intuitive, created on the basis of 18 years of experience in plasma cutting. After a short training, the operator can start working.
It offers easy operation, a wide range of settings, technological adaptability and ease of updating. The graphical interface of the control program enables effective work with drawings, visualization of the entire cutting process and machine control.
Unlike cheap plotters, the controller is responsible for full control of the cutting process in the RF BULLET CNC table.
Control system based on its own driver that works independently of Windows. Only data to the controller are uploaded from the computer.
After removing the problem, the torch returns to the last position and continues to work without causing damage to the cut element. Thanks to our controller, we avoid a situation in which a sheet of metal after a minor failure will be forced to throw away.

The control system consists of:
– control unit – Controller
– CutComp –  Control software
Controller:
Calculates the trajectories and momentum of machine movements, controlling the process and detecting errors. It communicates with the computer and enables comprehensive support for hardware settings. It sends control signals to the actuators, performs automatic cut height adjustment and monitors safety functions. It contains all inputs and outputs for controlling machines in cutting technology.

Basic options:
– Drawings read from WRYKRYS programs, non-standard editor or other CAD programs
– Scrolling, rotating, copying or mirroring drawings
– Determining the size of the sheet
– Drawings unfolded on a sheet
– Torch location in X, Y
– Saving reports for the current firing or subsequent ones
– Moving the burner up and down
– Gradual or sudden changes in the current feed
– Instant change of breakthrough time
– Start / Stop the cutting process
– Show on two predefined desktop spaces
– Quick configuration – defined starting point for the current position of the burner
– Graphical indication of the entire cutting process

Wrykrys software
Technologically, the WRYKRYS program is a CAD/CAM software designed to prepare production on CNC machines for burning and cutting. It is based on over twenty years of experience in this field and is designed to make the creation of burn plans much easier and simpler.
WRYKRYS has a number of advanced technological functions, offers automatic nesting, its own CAD system, the ability to create ventilation macros, optionally, for example, a 3D module for cutting bevels.

Advantages of the program:
· A well-organized user interface that is easy to use even for those who have never worked on similar devices.
· Import of the most popular *.dxf and *.dwg formats
· A large spectrum of macros designed to quickly and easily create basic projects.
· Compositing/nesting – automatic assembling of different shapes according to your choice.
· Economic calculation configurations – calculation of cutting time and price to improve
organization of work and minimize costs.
· Option to use leftover material to maximize sheet metal use.
· Version available in English, Polish, Czech, Slovak and any other language.